Skip to content

Language

Country

Small Vehicle Stripe Kit - Dual 10" Honeycomb

FG icon
Original price $227.94 - Original price $227.94
Original price
$227.94
$227.94 - $227.94
Current price $227.94
SKU USK-SV-D10-HC
  • Description
  • Vinyl Types
  • Looking to add a honeycomb stripe to your car?  Now you can with our easy DIY stripes that come computer cut and pre-masked for easy installation.  The stripe sections can easily be extended to any length by butting up the transfer paper on the stripe sections on the vehicle.  This kit also includes temporary spacers to help you get the perfect gap between stripes easily. Each section pair of stripes comes with 3 spacers. All you have to do is mark your center point and apply the spacers before the stripes and you’re off to the races! You can discard them once the stripes are applied.  Kit Includes:

    • (6) 10"x56" ready to apply stripe sections totaling 14ft
    • temporary vinyl spacers
    • One install kit PER ORDER
      • 3" mini medium stiffness squeegee
      • microfiber cloth
      • prep spray 
      • LUXE decal
      • plastic break away knife
  • Vinyl Options Explained

    • Basic Vinyl - Oracal 651 - These vinyls are your standard wet application intermediate calendar vinyl.  They are the same crafting vinyls you’ll find sellers on Etsy using.  They are the most economical option and do not stretch, which is why you won’t find them on solid stripes or larger decals.  The transfer mask used with this vinyl is made of paper so it can be wet after the decal is applied to help release it from the vinyl once applied.
    • Basic Tint  -Hexis C4000 - Our basic tints are the most optically clear and vibrant tints on the market.  They are polymeric calendar in construction, so they shrink very little over time.  Use these over bright colored vehicles for some crazy effects.  The transfer mask on these made of paper, so you can wet it to help release it from the vinyl once applied.
    • Reflective Vinyl - Orafol Oralite - Reflective materials are wet-apply and have an aggressive adhesive, so they resist pulling up very well.  The transfer mask on these made of paper, so you can wet it to help release it from the vinyl once applied.
    • Standard VinylThese vinyls are air-release cast vinyl that you’ll find used in top wrap shops worldwide.  These brands have a long track record of producing quality material that can be trusted to look amazing and last.  Most of our products are going to be either KPMF or 3M because we find their installability to be easy and consistent.  The transfer mask applied to these vinyl is specifically made for wrap vinyl and can be heated to accommodate moderate stretch.  Vvivid, TeckWrap, and other Chinese-made films are NOT top-tier and we will not make products with them.
    • Premium Vinyl - Textures, FX - These vinyls are the same as brands as the standard vinyl category, so they have the same qualities as the standard tier with the added benefit of 3D textures and pearlescent effects.  We take consideration when using these materials to ensure the “grain” of the material makes sense when installed on the car.  Textured vinyls should not be seamed with an overlap and should be butt-seamed instead.  Decals may have overlaps in the design, so that it can be trimmed off for a perfect seam once applied to the car.
    • Our stripe kits are designed to give DIY installers all the tools needed to achieve a perfect install. We apply transfer mask to each stripe and even include temporary vinyl spacers with dual stripe kits.
    • The transfer mask is even designed purposefully to help you achieve perfect spacing between stripe sections to accommodate any length. Just butt each stripe up with the mask touching and presto!
    • If you chose standard or premium vinyl types than the transfer mask will stretch to conform to moderate curves with the vinyl. If using basic or reflective vinyl you will need to cut the transfer paper at curves to not get wrinkles.
    • Is a SMALL VEHICLE kit enough? This is easy to determine by measuring your vehicle's panels. We recommend adding 6" to each longer panel such as a hood/roof, and less for smaller areas. With a total length of 14.5ft our small vehicle kit will stripe many vehicles including some sedans that have sunroofs.

    Install Video Coming Soon

    Installation Video

    Recommended Helpful Tools

    These are the same tools used by professionals to get the best results.

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)