Calcomanías para luces traseras de pista de carreras Challenger 2015+ - Interior

Name: Calcomanías para luces traseras de pista de carreras Challenger 2015+ - Interior
Brand: Luxe Auto Concepts
SKU: VDK-15DOCL-RT-TS-GB
Price: 44.99 USD
Availability: InStock

$44.99 - $44.99

$44.99

$44.99 - $44.99

$44.99

SKU

Descripción

Dodge hizo un trabajo increíble al diseñar las luces traseras de los Chargers y Challengers 2015 con la luz trasera de la pista de carreras suavemente iluminada. Para destacar entre los miles de Challengers que existen y darle a la parte trasera de su automóvil un aspecto único, hemos creado estas calcomanías que se pueden combinar de diferentes maneras. Al agregar calcomanías a la sección interna de sus luces, da la ilusión de un rectángulo sólido roto, y agregar las superposiciones externas da una apariencia única de 4 líneas horizontales..

Componentes del kit

TIPO DE KIT: Calcomanía de aplicación en seco
1 juego completo de calcas al estilo elegido
Mini escobilla de goma de rigidez media de 3 "
ropa de microfibra
spray de preparación
Calcomanía de lujo

Mueble

Modelos: SXT, R / T, GT, Scat Pack, T / A, SRT 392, Hellcat, Demon
Años: 2015, 2016, 2017, 2018

Instalación

Dificultad: 2 de 10
Tiempo estimado de instalación: 10 minutos

Cantidad

Installation video

Bracket Style Installation Video

Fade Style Installation Video

Installation Notes

Dodge Challenger Hellcat taillight being cleaned

1. Clean the surface of the light making it smooth to the touch. Make sure to clean deep into the gap around the light so there are no particles that get stuck to the adhesive of the decal.

Cutting our Luxe Auto Concepts decals for dodge challenger hellcat

2. Identify the correct piece using the text (e.g. "DO - Driver Outer") and then cut it out as close to the decal as possible.

alighting and applying decals to dodge challenger hellcat taillights

3. Test align the decal with the paper on and when you see where it goes then lightly tack the decal down starting in the bottom corner near the bottom of the valley. Tack the innermost edge... it will take heat to apply the decal fully up the red section.

heat and apply cast vinyl to challenger taillight

4. Heat the decal and apply it starting at the bottom of the valley and working your way to the top ridge. The decal should be curled up due to tension which is normal.

fold decal and final appy to challenger hellcat taillights

5. Heat the decal and working from the outer rounded corners first apply the film over the top ridge and ledge and work to the inner bracket edge of the decal.

remove transfer paper and apply final pressure

6. Remove the transfer paper from the decal carefully and then make sure it is totally applied and there are no bubbles or edges not locked down. Heating the decal will cause any area not applied to visible swell up or move. Apply firm pressure and then you are done!

Optional items to make the job easier

Debadge/Clay Bar Kit

Make sure the surface of your light is slick as glass to ensure the highest quality finish of your LightWrap™ installation.

White Luxe Squeegee

In combination with the included mini squeegee this will insure you have the right tool no matter the job.

Suede Buffer

When wet this buffer will glide without marring the surface of the vinyl on gloss finishes and make installations a breeze.

TAKE MY MONEY!

I previously had the staggered race track tint on my chally and when I saw the tiger design drop, I immediately ordered, and man was I not disappointed. To start the only difficult part was the inner bracket installation and even then it wasn’t even hard. The outer tint was super easy and was done in seconds. I had more trouble removing my previous tint than installing this! The look is insane! I’ve been so jealous or chargers having this tint and I wanted it for my chally and boy am I extremely happy with this product. Luxe has done nothing short of impressing me with their quality products. For my challenger drivers out there, you WILL NOT be disappointed with this look and purchase!