2015+ Challenger Racetrack Taillamp Decals - Inner

$32.50

Dodge did an amazing job designing the taillights on the 2015+ Chargers and Challengers with the smoothly illuminated racetrack taillamp.  To stand out among the thousands of other Challengers out there and give your car's rear a very unique look we've created these decals which can be combined in different ways.  By adding decals to the inner section of your lights it gives the illusion of one solid broken rectangle, and adding the outer overlays gives a very unique 4 horizontal line appearance.

  • KIT TYPE: Dry Application Decal
  • 1 complete set of decals in the style chosen
  • 3" mini medium stiffness squeegee
  • microfiber cloth
  • prep spray
  • Luxe decal
  • Models: SXT, R/T, GT, Scat Pack, T/A, SRT 392, Hellcat, Demon
  • Years: 2015, 2016, 2017, 2018
  • Difficulty: 2 of 10
  • Estimated Install Time: 10 minutes
Kit Contents
Complete set of decals, mini squeegee, microfiber cleaning cloth, Luxe prep spray, Luxe decal
Inner Vs. Outer Decals
We have products for both the inner and outer sections of the taillight, and on both pages you can add the other decals to block out all four sides.
Available Styles

Installation Notes

Dodge Challenger Hellcat taillight being cleaned
1. Clean the surface of the light making it smooth to the touch.  Make sure to clean deep into the gap around the light so there are no particles that get stuck to the adhesive of the decal.
Cutting our Luxe Auto Concepts decals for dodge challenger hellcat
2. Identify the correct piece using the text (e.g. "DO - Driver Outer") and then cut it out as close to the decal as possible.
alighting and applying decals to dodge challenger hellcat taillights
3. Test align the decal with the paper on and when you see where it goes then lightly tack the decal down starting in the bottom corner near the bottom of the valley.  Tack the innermost edge... it will take heat to apply the decal fully up the red section.
heat and apply cast vinyl to challenger taillight
4. Heat the decal and apply it starting at the bottom of the valley and working your way to the top ridge.  The decal should be curled up due to tension which is normal.
fold decal and final appy to challenger hellcat taillights
5. Heat the decal and working from the outer rounded corners first apply the film over the top ridge and ledge and work to the inner bracket edge of the decal.
remove transfer paper and apply final pressure
6. Remove the transfer paper from the decal carefully and then make sure it is totally applied and there are no bubbles or edges not locked down.  Heating the decal will cause any area not applied to visible swell up or move.  Apply firm pressure and then you are done!

Optional items to make the job easier

Debadge/Clay Bar Kit
Make sure the surface of your light is slick as glass to ensure the highest quality finish of your LightWrap™ installation.
White Luxe Squeegee
In combination with the included mini squeegee this will insure you have the right tool no matter the job.
Suede Buffer
When wet this buffer will glide without marring the surface of the vinyl on gloss finishes and make installations a breeze.

Customer Reviews

Based on 44 reviews
77%
(34)
16%
(7)
0%
(0)
2%
(1)
5%
(2)
S
S.
Nice MOD

This truly was a nice upgrade, looks awesome and is unique!

S
S.
Love this!!

Nice MOD!!

M
M.
Inner bracket tail light decal

Easy to install and looks great!

G
G.G.

First time using it ,so I did mess up alittle with the taillight but you only see up when up super close. Overall I love it, looks great and ull be ordering some more for my girlfriends challenger soon.

A
A.N.
They look Great

I messed up the first time and had to reorder, but it was good practice. They came out looking very clean and were easy to install. Didn't have a heat gun so I warmed it with a small torch. Came out perfect 👌

Customer Reviews

Based on 44 reviews
77%
(34)
16%
(7)
0%
(0)
2%
(1)
5%
(2)
S
S.
Nice MOD

This truly was a nice upgrade, looks awesome and is unique!

S
S.
Love this!!

Nice MOD!!

M
M.
Inner bracket tail light decal

Easy to install and looks great!

G
G.G.

First time using it ,so I did mess up alittle with the taillight but you only see up when up super close. Overall I love it, looks great and ull be ordering some more for my girlfriends challenger soon.

A
A.N.
They look Great

I messed up the first time and had to reorder, but it was good practice. They came out looking very clean and were easy to install. Didn't have a heat gun so I warmed it with a small torch. Came out perfect 👌