Universal Tint Kit FX Mid Carbon

$54.99
  • Sheet of LightWrap™ vinyl in selected size: 20" x 1yd, 20" x 2yd, 20" x 3yd
  • Install Kit: mini squeegee, prep spray, microfiber cloth, Luxe decal, and break away knife
  • All components are bagged to prevent marring during shipping
  • Packaged and shipped in a 3" rigid tube
    • Color: Mid Smoke
    • VHT: 24%
    • Finish: 3d Carbon Fiber 
    • Film Type: Laminated Cast
    • Adhesive: Slideable, Repositionable clear semi-permanent removable acrylic adhesive with micro diamond air release 
    • Application Type: Dry
    • Recommended Uses: Automotive Lights, Headlights, Taillights, Chrome Trim, Mirrors, Bumpers, Accents & Trim, Boat Windows, Soft Top Windows,
    • Conformability: Flat, simple and moderate compound curves, convex and concave surfaces
    • Thickness: 4.4 mil
    • Durability: Up to 10 years
    • Removable: Up to 3 years

     

    Luxe Auto Concepts recommends you always measure your lights or trim before purchasing one of our wrap kits.  Add a few inches on each side and then cut the material for the job.  The more film you have to work with the easier the installation will be, and the more complex the shape the more extra material you should have to help spread out the tension.

    Our universal tint kits are the most complete vehicle light tint kits on the market. We designed every element to ensure you have the best shot at tinting your vehicle with amazing results..... even the vinyl itself. We are the ONLY tint company to develop our own tint from the adhesive up. While other tint companies rebox Chinese tint film we designed and proudly manufacture our vinyl and our kits in the USA. Check out our videos and articles below for more information or our social media accounts for inspiration!

    More Information

    Anyone can install LightWrap with professional results.  Our blog will show you how in less than 5 minutes.
    Why LightWrap?  There are many ways to tint your lights.  We go over those ways in this article and compare each.
    If for any reason you need to remove LightWrap follow these simple steps to return your light to OEM.

    Optional items to make the job easier

    Debadge/Clay Bar Kit
    Make sure the surface of your light is slick as glass to ensure the highest quality finish of your LightWrap™ installation.
    White Luxe Squeegee
    In combination with the included mini squeegee this will insure you have the right tool no matter the job.
    Suede Buffer
    When wet this buffer will glide without marring the surface of the vinyl on gloss finishes and make installations a breeze.

    Customer Reviews

    Based on 2 reviews
    50%
    (1)
    0%
    (0)
    50%
    (1)
    0%
    (0)
    0%
    (0)
    J
    J.G.
    Love the carbon wrap

    Love how it came out did it by myself on my 300c tail lights and headlights.... definitely I would buy it again if I had another car

    A
    A.M.
    Universial mid carbon

    The product looks great and is very easy to use, but it just wasn’t enough film to do my entire taillight on my 2014 charger like luxe stated

    Did you purchase the small or large universal tint kit? If you got the large kit you should have just had to cut it once down the middle to make two 10'x60' pieces. One of those will cover the middle section of the light and the other 10x60 can be cut into multiple pieces to cover the two sides. If this isn't correct please contact us we'd love to know where it was short to update our records. Thanks!

    Customer Reviews

    Based on 2 reviews
    50%
    (1)
    0%
    (0)
    50%
    (1)
    0%
    (0)
    0%
    (0)
    J
    J.G.
    Love the carbon wrap

    Love how it came out did it by myself on my 300c tail lights and headlights.... definitely I would buy it again if I had another car

    A
    A.M.
    Universial mid carbon

    The product looks great and is very easy to use, but it just wasn’t enough film to do my entire taillight on my 2014 charger like luxe stated

    Did you purchase the small or large universal tint kit? If you got the large kit you should have just had to cut it once down the middle to make two 10'x60' pieces. One of those will cover the middle section of the light and the other 10x60 can be cut into multiple pieces to cover the two sides. If this isn't correct please contact us we'd love to know where it was short to update our records. Thanks!