Skip to content
2015+ Challenger Racetrack Taillamp Decals - Inner - Luxe Auto Concepts

2015+ Dodge Challenger Racetrack Taillamp Decals

$22.50 - $32.50
$22.50
$22.50 - $32.50
$22.50
SKU
  • Description
  • Kit Components
  • Fitment

  • Stand out from the crowd & give your Challenger's rear a super unique look with these decals which can be combined in different ways.  By adding decals to the inner section of your lights it gives the illusion of one solid broken rectangle, and adding the outer overlays gives a very unique 4 horizontal line appearance.

      BOGO DEAL
    Make it a bundle & get the matching
    inner or outer set for $10 off!

    Difficulty: 2 of 10
    Estimated Install Time: 10 minutes

    • KIT TYPE: Dry Application Decal
    • 1 complete set (2 ea.) of decals in the style chosen
    • 3" mini medium stiffness squeegee
    • microfiber cloth
    • prep spray
    • Luxe decal
    • Models: SXT, R/T, GT, Scat Pack, T/A, SRT 392, Hellcat, Demon
    • Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
    Kit Contents
    Complete set of decals, mini squeegee, microfiber cleaning cloth, Luxe prep spray, Luxe decal
    Inner Vs. Outer Decals
    We have products for both the inner and outer sections of the taillight, and on both pages you can add the other decals to block out all four sides.
    Available Styles

    Installation video

    Bracket Style Installation Video

    Fade Style Installation Video

    Installation Notes

    Dodge Challenger Hellcat taillight being cleaned
    1. Clean the surface of the light making it smooth to the touch.  Make sure to clean deep into the gap around the light so there are no particles that get stuck to the adhesive of the decal.
    Cutting our Luxe Auto Concepts decals for dodge challenger hellcat
    2. Identify the correct piece using the text (e.g. "DO - Driver Outer") and then cut it out as close to the decal as possible.
    alighting and applying decals to dodge challenger hellcat taillights
    3. Test align the decal with the paper on and when you see where it goes then lightly tack the decal down starting in the bottom corner near the bottom of the valley.  Tack the innermost edge... it will take heat to apply the decal fully up the red section.
    heat and apply cast vinyl to challenger taillight
    4. Heat the decal and apply it starting at the bottom of the valley and working your way to the top ridge.  The decal should be curled up due to tension which is normal.
    fold decal and final appy to challenger hellcat taillights
    5. Heat the decal and working from the outer rounded corners first apply the film over the top ridge and ledge and work to the inner bracket edge of the decal.
    remove transfer paper and apply final pressure
    6. Remove the transfer paper from the decal carefully and then make sure it is totally applied and there are no bubbles or edges not locked down.  Heating the decal will cause any area not applied to visible swell up or move.  Apply firm pressure and then you are done!

    Optional items to make the job easier

    Debadge/Clay Bar Kit
    Make sure the surface of your light is slick as glass to ensure the highest quality finish of your LightWrap™ installation.
    White Luxe Squeegee
    In combination with the included mini squeegee this will insure you have the right tool no matter the job.
    Suede Buffer
    When wet this buffer will glide without marring the surface of the vinyl on gloss finishes and make installations a breeze.

    Customer Reviews

    Based on 137 reviews
    78%
    (107)
    14%
    (19)
    1%
    (2)
    1%
    (2)
    5%
    (7)
    99.3
    93.8
    a
    alex a.

    Product was way too thin that when I first tried to apply it I tapped the edges with the tips of my finger and it ripped. Ontop of that it wouldn't come off the whit backing sheet and I didn't risk tryna pull it off so I just didn't use it. All in all 40 bucks wasted

    B
    BJ B.

    2015+ Dodge Challenger Racetrack Taillamp Decals

    C
    Chris S.
    Tail light

    Gave it a good look 5 stars

    I
    Israel G.
    Completely changes your look!

    awesome and easy mods to install. makes the car looks so clean.

    A
    Alfredo A.M.D.O.
    !

    No good

    123

    Customer Reviews

    Based on 137 reviews
    78%
    (107)
    14%
    (19)
    1%
    (2)
    1%
    (2)
    5%
    (7)
    99.3
    93.8
    a
    alex a.

    Product was way too thin that when I first tried to apply it I tapped the edges with the tips of my finger and it ripped. Ontop of that it wouldn't come off the whit backing sheet and I didn't risk tryna pull it off so I just didn't use it. All in all 40 bucks wasted

    B
    BJ B.

    2015+ Dodge Challenger Racetrack Taillamp Decals

    C
    Chris S.
    Tail light

    Gave it a good look 5 stars

    I
    Israel G.
    Completely changes your look!

    awesome and easy mods to install. makes the car looks so clean.

    A
    Alfredo A.M.D.O.
    !

    No good

    123